SPU造句

1、The SPU actually loads two instructions at a time from a doubleword-aligned boundary.
SPU实际上会从一个双字对齐的边界开始一次加载两条指令

2、Here are some of the more common SPU intrinsics.
下面是比较常见一些SPUintrinsic(类型没有给出,这是因为它们大多为多态)。

3、Debugging SPU programs creates a new set of problems.
调试s PU程序出现一些新的问题

4、The SPU processes buffer #1.
SPU处理一号缓冲区。

5、Also, exceptions resulting from executed code aren't reported to the SPU itself.
而且执行代码产生异常结果也不会向SPU进行汇报

6、The SPU waits for the buffer to fill up.
SPU等待缓冲区被填充。

7、Instead, the SPU can access any 128-bit word in the local store at L1 cache speed.
相反SPU可以以L1缓存的速度访问本地存储器中的任何128位的字。

8、The SPU has no special registers.
SPU没有特殊的寄存器。

9、The SPU processes buffer #2.
SPU处理二号缓冲区。

10、The SPU waits for buffer #2 to finish filling.
SPU等待二号缓冲区被填充。

11、Often this is called by the SPU code itself.
通常这是由SPU代码本身调用的。

12、The SPU has no real hardware support for branch hinting.
SPU对于分支提示并没有没有实际硬件支持

13、The SPU queues a DMA PUT to transmit the buffer back to main memory.
SPU对DMA PUT进行排队,从而将缓冲区传输回主内存。

14、It turns out that several SPU instructions deal with only one of the register's values.
几个SPU指令只能处理这些寄存器值中的一个。

15、Remember that the SPU registers are 128 bits wide, but our value is only 32 bits long.
SPU寄存器均为128位宽,但我们的值只有32位长。

16、A signal might need to be delivered to a thread that is executing SPU code.
我们可能需要信号发送给正在执行SPU代码的线程。

17、Every directory in spufs refers to a logical spu context.
spufs中的每个目录都是指一个逻辑的spu上下文。

18、Branch hinting is necessary on the SPU because mispredicted branches come at a high cost.
分支提示之所以SPU必需的是因为预测错误的分支可能会带来高耗费

19、An SPU resembles a cross between a simple CPU design and a digital signal processor.
SPU就像简单的CPU设计与数字信号处理器之间的交叉

20、The SPU queues a DMA GET to pull a portion of the problem data set from main memory to a buffer.
SPU对DMA GET进行排队,从而将涉及数据集的一部分从主内存传输到一个缓冲区。

21、The two transmission steps do not involve the SPU at all, but only the MFC.
两个传输步骤根本没有涉及SPU,只涉及MFC(这是比较大的SPE的一部分)。

22、The SPU waits for the buffer to finish being transmitted.
SPU等待缓冲区完成传输。

23、starts execution of SPU code.
开始执行SPU代码。

24、SPU code is compiled separately from the PPC code and gets loaded at run time.
SPU代码与PPC代码分开进行编译,并在运行时进行加载。

SPU翻译

【计】 标量处理部件, 系统划分部件, 系统处理部件 详情
0
纠错/补充

猜你喜欢

单词推荐

SPU造句 单词乎
m.dancihu.com