burr造句

1、The matching effect can be observed by the fact whether the burr distribution is uniform or not.
通过观察焊瘤是否具有均匀分布的毛刺特征，可以初步判断顶锻参数的匹配效果。

2、This paper describes the use of off-line within the burr removal methods.
本文叙述了采用离线去除内毛刺的方法。

3、Pure white was obtained by entirely effacing the burr and burnishing the plate.
光白部份则把芒刺激完全磨去。

4、Study on the Affection Factors of the Feed-Direction Burr in Turning
车削加工中进给方向毛刺影响因素研究

5、Study on Metal Cutting Burr Formation and Prediction
金属切削毛刺的形成及预报的研究

6、Present Status of Burr Control and Debarring Process on Mechanical Elements
机械零件毛刺控制及去除工艺现状

7、Study on Causes and Improvement of Burr in Routing
铣板毛刺的产生原因及对策

8、CAUSE OF BURR FORMATION IN HG5 AND ITS PREVENTION
HG5低碳低硅钢毛刺缺陷的成因与防止

9、A Equipment for the Elimination of Inner-Wall Burr of Welded Pipe
实用电焊钢管内毛刺清除装置

10、On-line Clearance Equip of Burr for High Frequency Weld Steel Tube(ERW)
机械式直缝焊管内毛刺清除装置

11、To form a burr on
在…上形成毛口

12、A Method of Preparing Burr Nickel Plated Deep Drawn Steel Strip
制备毛刺镀镍深冲钢带的方法

13、<title>w to Solve the Burr Problem in FPGA Circuit Design
如何解决FPGA电路设计中的毛刺问题

14、Analysis of Machine Tool Motion in Rotary Burr Machining
旋转锉螺旋刃加工时机床运动的分析

15、A Study on the Leaned Burr Formation in Drilling process
钻削加工中进给方向毛刺生成机理的研究

16、Ream, burr and size.
刮除毛刺，测量尺寸。

17、Development of the Electricity Chemistry Burr Machine of Gear side
齿轮端面电化学去毛刺机床研制

18、The Affection of Cutting Parameters on the Burr in Precision Machining
精密加工中切削参数对毛刺尺寸的影响

19、Study on burr suppression of cold saw blade
抑制冷锯锯片毛刺的研究

20、Limit Change Condition of Forward Burr and Fracture
切削方向毛刺与亏缺的界限转换条件

21、Forming Mechanism of Tooth Flank Burr in Cutting Gear
齿轮齿形切削加工中的毛刺生成机理

22、Equipment for wide belt grinding to remove the burr of the sheet elements
一种宽砂带磨削去除薄板零件毛刺的设备

23、Analysis of the Structure of the Burr Masher for Strip Steel
带钢压毛刺机结构评析

24、The winter's forst must rend the burr of the nut before the fruit is seen.
只有冬天的寒霜撕碎了坚果的芒刺，才能看到果实。

25、The Clearance of Hard Burr of Small Modulus Gear in Batches Manufacture
批量加工小模数齿轮硬毛刺的清除

26、DISCUSS OF BURR MECHANISM, SHAPE AND DEBARRING METHOD
毛刺发生机理与形态及去除方法的探讨

27、How to treat the burr of maching process
如何对待机械加工过程中的毛刺现象

28、Micro computer Measuring System of Burr and Edge Quatity
毛刺及棱边质量形貌自动检测系统

29、The winter's frost must rend the burr of the nut before the fruit is seen.
只要冬天的寒霜撕碎了坚果的芒刺，才能看到果实。

30、Study on the Forming Principle of the Cutting Burr in Turning
车削加工中切削毛刺生成机理的研究

burr翻译

n. 毛边, 钻孔器, 芒刺vt. 发音含混地说话vi. 发音含混地说话【医】 [牙]钻, 圆头锉 详情