bushing造句

1、Analysis of 10 kV PT socket bushing flashover in Shajiao C Power Plant
沙角发电C厂两起10kV　PT插座套管绝缘闪络事故的分析

2、That way, all movement takes place between the bushing and bearing - instead of on the bolt.
这样，所有运动的发生之间的衬套和轴承-而不是对螺栓。

3、The longer bronze rod bushing provides a maximum load bearing support.
时间越长青铜连杆衬套提供最大承重的支持。

4、The cast iron rod bushing provides maximum load bearing support.
铸铁连杆衬套提供最大承重的支持。

5、Tighten leaf spring press until bushing flange bottoms solidly against leaf spring eye.
上紧叶片弹簧加压机直到衬套凸缘的底部扎实地扺住叶片弹簧的孔眼。

6、A bushing or similar lining for a bearing, made from a copper alloy
铜套或铜衬垫用铜合金制的轴承轴瓦或套筒式衬垫

7、Improvement of Heat Treatment Process for Vertical Bushing of Dri ll Rigs
钻机立轴套热处理工艺的改进

8、The bushing ring flange suitable temperature is decided by the designer according to the situation.
衬环法兰的适用温度由设计者根据情况决定。

9、The longer cast iron rod bushing provides maximum load bearing support.
铸铁的时间越长连杆衬套提供最大承重的支持。

10、A bushing used to secure a pipe joint
套圈，箍用来缚紧管子接头的套圈

11、Premature wear failure analysis of track pin bushing in swamp bulldozer
湿地推土机履带销套的早期磨损失效分析

12、The function of a bushing is to prevent metals from touching one another
衬套的作用是阻止金属的彼此碰撞。

13、Oil filled bushing should have plugs for test of power factor.
充油套管应带有用于进行功率因数试验的接插头。

14、The designer may lower the pressure on the packing by placing a throat bushing in the pump case.
设计者可在泵壳内放置喉道补心以降低在填料上的压力(图)。

15、Place Taper - lock Bushing and Timing Belt Pulley on the transmission shaft.
将锥面紧固套与同步带轮装在传动轮上。

16、A bushing used to secure a pipe joint.
套圈，箍用来缚紧管子接头的套圈

17、A bushing or similar lining for a bearing, made from a copper alloy.
铜套或铜衬垫用铜合金制的轴承轴瓦或套筒式衬垫

18、Connection of lead and bushing shall be tight and correct, bushing should be in good condition.
引出线与套管的连接应牢靠，接线正确。套管应完好无损。

19、A New type Ball Bushing Bearing
一种新型滚珠衬套轴承

20、Pump drive shaft and bushing wear, the tolerance clearance increases, will affect oil pump.
齿轮泵主动轴与衬套磨损后，其配合间隙增大，必将影响泵油量。

21、File off both bores to the hexagon of the insertion bushing using a needle-point file.
用细锉将两个孔锉成镶入衬套的六边形。

22、The steel retaining plate has two functions, retaining the bushing and preventing rod rotation.
固定板的钢具有两种功能，保留套管和防止杆旋转。

23、The extra long bushing offers excellent load bearing characteristics.
额外的长期套管提供出色的承载特性。

24、Bored secant pile is mostly constructed by bushing pile rig in our country.
咬合桩在国内一般使用套管钻机施工。

25、Place Taper-lock Bushing and Timing Belt Pulley on the transmission shaft.
将锥面紧固套与同步带轮装在传动轮上。

26、Bushing is one of the most important insulation parts in transformer.
套管是变压器中一种重要的部件。

27、Self-lubricating rod bushing with a low coefficient of friction for smooth actuation.
自润滑连杆衬套的低摩擦系数平稳驱动。

28、Master cylinder bushing at the clutch pedal.
离合器踏板处的总泵衬套。

29、In this experiment, the flame stability under large bushing is better than under small bushing.
在实验中，大套管实验工况的火焰稳定性比小套管要好。

30、Tighten leaf spring press until bushing is extracted from leaf spring.
上紧叶片弹簧加压机直到衬套被拔出叶片弹簧。

bushing翻译