ejector造句

1、Upper ejector rod was added in the die structure for ease of workpiece separation.
在模具结构中增加了上项杆(上打料棒)，便于工件脱离。

2、The ejector with a lobed nozzle is of high efficiency in pumping and mixing.
波瓣喷管引射器具有高效的引射掺混特性。

3、ANALYTICAL AND EXPERIMENTAL INVESTIGATION OF SUPERSONIC EJECTOR NOZZLE
超音速引射喷管的分析和实验研究

4、Hide the ejector seat levers.
隐藏弹射座椅的操纵杆。

5、Suitable sizes of push-back pins may be selected from a standard ejector pin range.
回程杆的合适尺寸可以在标准的顶杆范围内选择。

6、The plain diameter ejector pin may be used in one of two ways.
普通的顶杆可以有两种使用方法。

7、The undercut area may stick slide. We may consider to add an ejector pin on the slide.
产品扣位处可能粘行位。我们需考虑行位上加顶针；

8、Part of an engine nacelle and an exhaust ejector are visible at left.
在左侧可看见部分的发动机短舱和排气顶针。

9、The mould plate and ejector grid system is shown in chain-dotted lines in the cross-sectional view.
模板和顶料格架系统在剖面图上以点划线表示。

10、Can we add ejector sleeves or ejector pins in the boss of this part?
产品的这个位置不能出模，我们打算做行位，在此面上会有分模线，你接受吗？

11、In the case of air ejector priming device the operation procedure as follow.
在用自吸装置的情况下，操作程序如下。

12、Q: Because you'll release this section of the roof and engage and fire the passenger ejector seat.
因为你会开了车顶和启动和发射乘客弹射座椅。

13、Ejector seat levers can only be used once, and their consequences are significant and irreversible.
弹射座椅操纵杆只能用一次，它的使用将引起重要的变化，而且这个。

14、Characteristics and Test Study of Water Jet Air Ejector of 200MW Set
200MW机组射水抽气器性能试验研究

15、The direction of movement of this ejector pin is, therefore, controlled by this hole.
因此顶杆的运动方向由这个孔来控制。

16、At last, numerical simulation of this ejector was performed.
最后，对引射器进行了数值模拟。

17、Each ejector pin diameter has a number of different lengths associated with it.
每一种顶杆直径有许多不同长度。

ejector翻译

n. 驱逐者, 排出器, 放出器【化】 喷射泵; 喷射器【医】 喷射器, 剔出物, 排除器 详情