blanking造句

1、Must carry on the blanking force and the center of pressure computation once more.
再次要进行冲裁力和压力中心的计算。

2、The blanking clearance and rational blanking clearance are narrated.
叙述了冲裁间隙和合理冲裁间隙。

3、Cutting: refers to the workpiece through the LASER cutting or CNC punch blanking process.
下料：指工件经过LASER切割或数控冲床冲裁的工艺过程。

4、The precision of present blanking method is very low, the automation degree is not high.
现行的下料方法精度很低，自动化程度不高；

5、In addition, the second end is connected with the blanking hole.
另外，该上所述第二端为与掉料口连接。

6、Application of the Node Method in CAD System of the Blanking Die Design
结点法在冲裁模CAD系统中的应用

7、The first set is blanking and punching compound die.
第一组是消隐和冲压复合模。

8、An Easily Extended Application of Blanking Die by CAD
一种易于推广应用的冲裁模CAD

9、Failure Analyses of Blanking Die Made of Cr12 Steel
Cr12钢冷冲模早期失效原因分析

10、There are usually burrs in the fracture of thin sheet parts stamped with steel blanking die.
用常规钢制冲模冲裁薄片零件，断口常有毛刺。

11、In the blanking of thin material, blanking dies without clearance are usually chosen.
在冲裁薄料时，通常要用的是无间隙的冲模。

12、The Application of 012AL on the Blanking Die for Nut
012Al在螺母冲头模具上的应用

13、Blanking layout is a NP problem, and is widely needed in the industry.
冲裁件的排样是一个NP问题，在工业界具有广泛的需求。

14、Remove the blanking caps from the electrical connector and the receptacle.
拆下电插头(9)以及接头(10)上的堵盖。

15、Readout of the captured image proceeds at the completion of blanking as new frame scanning begins.
在熄灭完成，新的帧扫描开始的时候，所捕捉的图像继续读数。

16、The die is reliable in operation and makes high quality blanking pieces.
该模具工作可靠，切料质量高。

17、Blanking gap is the difference size between the male die and female die's work part.
冲裁间隙是指冲裁凸模和凹模之间工作部分的尺寸之差。

18、Based on the example, sets up a mathematic mould for jacking blanking and solving it with computer.
本文通过实例建立套裁下料问题的数学模型并使用计算机对其求解。

19、Design of Multistation Blanking Die Joined by Chain
铰链连续冲裁模设计

20、Blanking gap has great effect on the blanking procedure.
冲裁间隙对冲裁过程有着很大的影响。

21、The blanking force calculation of blanking through inclined sheet metal is an outstuding subject.
倾斜板料冲裁的冲裁力计算是一个尚待研究的课题。

22、A polygon vertex algorithm is a new optimizing method of blanking layout.
多边形顶点算法是冲裁排样优化问题的一种新算法。

23、The adaptive sidelobe blanking is an effective measure against active jamming.
旁瓣消隐技术（SLB）是雷达抗有源干扰的有效方法。

24、It is critical calculating blanking step in normal single row optimum layout.
普通单排优化排样中冲裁步距的计算非常关键。

blanking翻译