manhole造句

1、A MANHOLE COVER MADE OF “SPE-SFRC”FOR GUARDING AGAINST THEFT
用SPE-SFRC材料制作的“防盗”窨井盖

2、Nozzle and manhole location specified by the Purchaser shall not be changed by Vendor.
卖方不能改变买方指定的设备口及人孔位置。

3、Hans's just been over to check on this one between manhole 6 and manhole 7.
汉斯刚来检查了6号检查井和7号检查井之问的那段管道。

4、Why are manhole cover round in shape?
点解下水道的盖是圆形的？

5、And the next thing I know, I see a garbage truck, and it starts launching manhole covers!
我知道接下来的事情，我看到了一辆垃圾车，它开始推出井盖。

6、One day he went down to the manhole again.
一天他又钻进下水道。

7、Or the manhole cover outside your apartment?
还是你公寓外面的下水井盖？

8、The manhole led to a corridor, one better lit than any sewer, and dryer.
人孔导致一个走廊，一发亮地比任何的下水道，和乾衣机好。

9、In theory, ductile iron manhole cover when installed, should be a whole.
在理论上说，球墨铸铁井盖在安装的时候，应该是一个整体。

10、Resin composite manhole cover is made of polymer composite materials, no recovery value.
树脂复合井盖是由高分子复合材料制成，没有任何回收价值。

11、Cast iron manhole cover of good quality is to see its toughness and hardness.
质量好的铸铁井盖是要看其韧度和硬度的。

12、At the same time, the manhole cover has the characteristics of insulation, noise free.
同时，这种井盖还具有绝缘、无噪声的特点。

13、Here's the question: Why are manhole covers round?
这是问题：为什么下水道井盖是圆的？

14、Both size and related position of the manhole and the feeding port are variable upon necessity.
入孔与进料口的大小和相对位置，可根据需求改变。

15、The manhole cover can be traced back to the Rome times, when the cover is made of stone.
井盖最早可追溯至罗马时代，当时的井盖是用石头做成的。

16、Other areas shall use "B" type manhole covers.
其余的人孔盖为B型人孔盖。

17、The manhole cover is too weight to move.
人孔盖太沉移不动。

18、If we could get that manhole cover up …
要是我们能把那个下水道入口盖打开…

19、a flush iron cover for a manhole (as in a street)
直接盖在人孔（如街道上）上的铁盖子。

20、Cast iron manhole cover anti impact resistance, easy rupture.
铸铁检查井盖不耐冲击，易破裂。

21、Please move the manhole cover away.
请将人孔盖移开。

22、Why is a manhole cover round
为什么下水道的盖子是圆形的？

23、Scavenge box manhole opened, oil sludge removed out and wiped with diesel oil.
扫气箱道门打开，油渣清除并用柴油擦净。

24、The manhole cover is too weighty to move.
人孔盖在重移不动。

25、Nozzle and manhole size shall not be changed by Vendor.
卖方不能改变设备口及人孔的尺寸。

manhole翻译