camber造句

1、The superstructure has a depth of 3 ft. 6 in. with a marked camber of 19 ft. 8 in.
上部结构的建筑高度为3英尺6英寸，有19英尺8英寸显著的上拱度。

2、It will result in: increase of taper, inner corner Angle and camber is swept past outwards.
这种情况会造成：锥度增加、内棱角问题、弧形向外掠出。

3、This feature is useful in solving center flexure as well as mitigating camber of product.
这一特征有助于解决中心弯曲以及减轻产品的弯度。

4、The automatic camber control system AGC of the line is consist of first PLC and secondary computer.
该生产线的自动凸度控制系统AGC是由一级PLC和二级计算机组成的。

5、Inward tilt is negative camber and outward tilt is positive camber.
向内倾斜，是消极的拱和拱向外倾斜是积极的。

6、Camber angle fixing, preventing automobile' s suspending and data's pulsating.
外倾角固定功能，防止车身悬起数据跳动；

7、Adjust camber link so that it is more level, in the front.
调节前轮内倾角调节杆使得它更接近水平。

8、In this thesis, the basic aspects about forming process of camber die are studied etically.
本论文对曲面凹模成形工艺的若干问题进行了系统的理论分析。

9、Then, the camber equation has been developed for the cross points.
然后解曲面方程求出交点。

10、But during the practical application, the surface camber of the figure is different.
但是在实际应用中，图形的表面曲率是不一样的。

11、The front subframe is modified for extra camber and castor.
前副车架被修改为额外拱形和蓖麻。

12、Determine the camber factor.
确定曲面的因素。

13、The measures for improving wear of camber for lockup were proposed.
针对锁紧弧面的磨损提出了改善措施。

14、This wheel travel does not affect the camber or caster geometries like current vehicles.
该系统不会和目前的其他车辆那样影响外、纵倾角的几何参数。

15、The contents of back wheel′s design include camber angle and toe-in;
后轮设计有后轮外倾角和后轮前束；

16、The equation of camber is often used when the bend of girder is being studied.
在对梁的弯曲进行研究时，经常要用到弯矩方程。

17、You can specify wing attributes including camber and centerline sheeting of an airfoil.
你能够标示翅膀归结于包括中凸形和机翼的中心线护墙板。

camber翻译

n. 弧形, 中凸形, (机翼的)弯曲度vi. 成弧形vt. 使弯作弧形【机】 弧面, 曲度, 外倾角 详情