workpiece造句

1、Cutting: refers to the workpiece through the LASER cutting or CNC punch blanking process.
下料：指工件经过LASER切割或数控冲床冲裁的工艺过程。

2、To join the workpiece should be oil removal of nitrate.
向硝盐内加入工件应去除油污。

3、RESEARCH ON TRANSFORMATION OF WORKPIECE INFORMATION IN CAD/CAPP
CAD/CAPP中零件信息共享的研究

4、For rotation of the workpiece around the horizontal axis.
对于周围的水平轴转动工件。

5、We have workpiece materials from a very soft, buttery consistency to very hard and shear resistant.
我们的工件原材料从非常软，像黄油一样黏稠的到非常硬的有抗剪力都有。

6、The workpiece and fixture should be fully dry before loading.
工件与夹具装炉前应充分烘干。

7、Quite molten pool, little spatter and no undercut ensure workpiece be in good welding appearance.
焊接熔池平静，飞溅小，不咬边，焊缝成形美观。

8、Using frequency conversion stepless governing for workpiece rotating.
工件旋转采用变频无级调速。

9、Upper ejector rod was added in the die structure for ease of workpiece separation.
在模具结构中增加了上项杆(上打料棒)，便于工件脱离。

10、Induction surface hardening of the workpiece material is usually carbon steel.
感应加热表面淬火的工件材料一般为中碳钢。

11、Conception and classification of weld workpiece feature were introduced.
提出了焊接工件特征的概念和分类。

12、Implenention of IGES-based CAD/CMM Automatic Workpiece Modelling
基于IGES的CAD/CMM零件自动建模的实现

13、High control precision and automaticity, good consistency of heat-treating workpiece quality.
控制精度及自动化程度高，热处理后工件质量一致性。

14、Large scale workpiece in several big range measuring parts of the rapid inspection.
大型工件大范围内多处测量部位的快速检验。

15、If the workpiece is of simple construction, the jig may be clamped on the workpiece.
如果工件结构比较简单，钻模可夹持在工件上。

16、The workpiece is already on the lathe.
工件已经上了车床。

17、This paper advances a new method to machine regular hexagon workpiece by lathe.
本文提出了一种在车床上加工正六边形工件的新方法。

18、The hardness of the rubber contact wheel, the grinding depth of the workpiece per feed once.
探讨橡胶接触轮硬度、每次进给的磨削深度、磨削力和砂带磨损对工件表面粗糙度的影响。

19、The effect of sliding block feed on the workpiece quality and rolling roller life is analyzed.
针对精密冷辗机的工作特点，分析了冷辗扩过程中滑块进给对工件质量及芯辊受力的影响。

20、During machining, ultrasonic vibration of workpiece can improve the machining process.
在加工过程中，通过超声波振动，工件加工工艺得到改善。

21、The sampled data of a workpiece to be measured is obtained on a universal tool micr…
在万能工具显微镜上获得了采样数据，给出了计算结果。

22、DELTA also includes a gooseneck lamp to help get a clear view of the workpiece and grinding wheels.
三角洲还包括鹅颈灯，以帮助得到一个清晰的工件和砂轮。

23、The Discussion on Compton Scattering for Workpiece Inspection
利用Compton散射进行工件检测的探讨

24、Solar cells supply the energy for this workpiece detector.
太阳能电池为工件探测器提供能源。

25、A great variety of workpiece may be produced without resorting to a machining operation.
很多种类的工件可能不用选择机加工操作就可以做出来。

26、adjustable jaws center workpiece in a lathe or center tool in a drill
在车床或钻孔机中心工具内的可调整中心工件。

27、This workpiece is no more elastic than that one.
这个工件不比那个工件更有弹性。

28、Drilling: refers to the use of drilling or milling machine drill hole of the workpiece process.
钻孔：指在钻床或铣床上使用钻头对工件进行打孔的工艺过程。

29、A vectorization system for workpiece drawing images is presented in this paper.
介绍了一个工件图纸自动输入的矢量化系统。

30、This workpiece is not more elastic thant that one.
这个工件不比那个工件更有弹性。

workpiece翻译