weld造句

1、Weld Shape Evaluation and Metallographic Examination of ERW Pipes
ERW直缝焊管焊缝形态与金相检验评价

2、We used to weld pipes with direct. C are welder a. C. Welder.
我们总是用直流(交换)电弧焊机焊吸收子。

3、Lasers, however, can be aimed to weld a join from a distance.
然而，激光可以远距离的对准焊接点。

4、The government can weld the nation together to face the difficulties ahead.
政府能把全国人民团结在一起，面对前面的困难。

5、Use the grinding wheel or other tools to shovel the weld and remove the tracks.
可用砂轮或其他工具铲开焊缝与拆卸轨道。

6、The crisis helped to weld the party together.
这场危机促使整个党紧密地团结在一起。

7、Some opinions about brittle fracture, gray spot and impurities in the weld are proposed.
对焊缝缺陷脆性断口、灰斑、夹杂物提出了见解。

8、Welders operate welding equipment to weld ferrous and non-ferrous metals.
焊工操作焊接设备焊接亚铁金属和有色金属。

9、Therefore, the weld joint is the most significant point in the weld-quality-controlling.
因此，该处对于焊接质量的控制就成为很重要的位置。

10、In extreme instances, the contacts may weld together.
极端情况下，触点会焊接在一起。

11、Weld a bunch of untrained recruits into an efficient fighting force.
把未经训练的一群新兵组织成有战斗力的部队。

12、Abstract: A cavity is made on both sides of weld bead
文摘:在焊道表面两侧作一空腔。

13、STUDY ON WELD HOT CRACKING SENSITIVITY IN CAST SUPERALLOYS K6C AND K18
K6C、K18铸造高温合金焊接热裂纹敏感性的研究

14、On-line Clearance Equip of Burr for High Frequency Weld Steel Tube(ERW)
机械式直缝焊管内毛刺清除装置

15、Influence of the relative width of weld metal and strength of weld metal wes researched.
研究了焊缝金属相对宽度和焊缝金属强度对接头性能的影响。

16、It takes speed and skill to weld steel at this heat.
在这样的温度下焊钢需要速度和技术。

17、Comparison of JB4730－94 and ASME Code on Ultrasonic Inspection of Weld Seam
JB4730-94标准与ASME规范在焊缝超声波探伤上的对比

18、We now know that this weld contains more than 10 percent ferrite but less than 20 percent.
现在，我们知道了该焊料的铁素体含量大于10%但小于20%。

19、SOME PROBLEMS OF WELD QUALITY TEST OF SPACE FRAMES WITH HOLLOW BALL JOINT
关于空心球节点网架焊缝质量检验的几个问题

20、A beam of light produced by a laser can weld metals.
激光器发生的光束可以焊接金属。

21、Once the assembly is situated and held in place, weld it as shown below.
一旦大会和地点是位于举行，焊接它如下所示。

22、INFLUENCE OF Hf ON WELD CRACKING FOR CAST NICKEL BASE SUPERALLOYS
铪对铸造镍基高温合金焊接裂纹的影响

23、Weld scene deviation should allow the group to meet clearance norms.
现场焊缝组对间隙的允许偏差应符合规范的规定。

24、The eventual aim is for Weld to use around 1k per bean.
对于Weld来说，最终的目标是让每个bean占据1k内存空间。

25、Conception and classification of weld workpiece feature were introduced.
提出了焊接工件特征的概念和分类。

26、The main purpose of studying welding technology AC pulsed MIG is used to weld splint.
研究交流脉冲MIG焊接工艺的主要目的是为了焊接薄板。

27、Secure the mounts and weld them using a 1 "bead on each side."
安全和焊接他们的坐骑使用1“方珠每个。”

28、Look at every panel join on this Ibiza and there's a continuous line of weld along each one.
看看每个小组参加关于这一伊维萨和有一个不断线沿线的每一个焊缝。

29、Place identical weld beads on the opposite side of the gusset.
扣板相同的地点对面焊珠的。

30、THE NUMERICAL SIMULATION OF THE STRESS FIELD OF WHITE IRON WELD REPAIR
白口铸铁焊补应力场的数值模拟

weld翻译

n. 焊接处, 焊接vt. 焊接, 使密接, 使结合, 使成整体vi. 焊牢【电】 熔接 详情